FOR SALE / ref WHQ1328052026
TOS Varnsdorf WHQ 13 CNC Heidenhain year 2000/ 2026
Retrofitteed/ revised 2025 – 2026
**regularly maintained TOS Varnsdorf WHQ 13 CNC Heidenhain
CNC TNC426M, year 2000,
spindle re-lub and new bearings in 2025 preforemed by TOS Varnsdorf techniciaans (invoice can be proofed )
X = 3500 mm
Y = 2500 mm
Z = 1250 mm
W = 800 mm
Max. spindle speeds 2500 RPM
Rotary table 1800x2200
Max. payload 12000 kg
Automatic Tool Changer AVN 60 positions
Lifting operator platform
External tool cooling
Spindle clamping support
Geometry report and bulbar measurement from 2.3.2026 attached
Scope of repair X and Z axis
1. Complete dismantling and cleaning of X and Z axis machine bed
2. Regrinding of X and Z axis guide ways at Czech manufacturer of CNC horizontal boring machines –
3. Removal of old lining of X and Z axis saddle
4. Anchoring of re-grinded X and Z axis machine bed
5. New hand-scraped lining from Biplast-V on X and Z axis saddle, eventually also on wedge bars surfaces
6. Installation of balls crews, linear scales, and other parts of X and Z axis
7. Cleaning and eventual exchange of clogged central lubrication tubing
8. Testing of all lubrication points with external lubrication aggregate
9. Testing of geometric accuracy with electrical hand drill attached to end of ballscrew
10. New groves for oil in Bi-plast V lining
11. New guide wipers on guide ways
12. Guarantee for geometric accuracy of X and Z according to accuracy of brand new TOS Varnsdorf
WH(Q)13
13. Protocol takeover of anchored and levelled X and Z machine beds at measurement will be
performed by digital water level Wyller, feed of X and Z axis saddle will be executed by electrical hand
drill attached to end of ball screw
spindle run out at 0...0.01 (video attached)
spindle run out at 300...0.015 (video attached)
Repairs performed from 20.4.2026 to 19.5.2026:
Remain repairs to complete scope of repair X and Z axis according to specifications above:
repair of X, Y and Z axis ball screws at ball screw producer KSK Kurim
Inc. Transport cleaning, new balls, new seals, tension setting, KSK protocol, packing, transport back
Guarantee for geometric accuracy of X and Z according to accuracy of brand new TOS Varnsdorf WHN(Q)13
Few photos before dismantling as well photo from workshop attached.
I can take photo of regrinded X and Z axis also
Machine has spindle and Y axis in tolerances of new machine, so factory decided that will do repair of X and Z axis so then we can guarantee that whole machine can be in accuracy of new machine.
Then on a stock partner is a new Heidenhain TNC620 + options so we can even equip this machine with new CNC.
Now after regrinding of X and Z is necessary to finish hand scraping of new Biplast V lining on both X and Z saddle.
Video here : https://youtu.be/Yk3XjGkFIYc
Original video upon request .
Total price for WHQ 13 CNC with repaired X and Z,on request .
